Emlid RS2 – RTK Advanced Survey System


Emlid RS2 – RTK Advanced Survey System

$11,995.00 Inc. GST.

This multi-band RTK survey kit includes all components required to establish a robust, multi-frequency RTK mapping setup, with a local base station and a rover unit. This kit offers improved mapping results on more complex scenarios, closer to trees or tall structures. Controlled by the Emlid easy to use free app – Reach View.

The reach view app is a basic mapping app collecting cm accurate data from a wide range of datum options. Connect units to third party software like FieldGenius for more advanced mapping features.

KIT INCLUDES: Base unit, Rover unit, tripod, Tribrach with optical plummet, rotating tribrach adaptor, 2m pole, Extension pole (0.15m) & Bipod.


  • IP67 – waterproof to 1m depth
  • Temperature operating range -20° C – 65° C
  • Super tough polycarbonate body covered with elastomer
  • Industrial battery – LiFeP04. 2000+ charging cycles maintaining original capacity
  • Compact and lightweight (126x142mm – 950g)

Our Partners: mapgear.com.au

Check out the intro video here

Base Station & Rover Kit application

If you are regularly working out of range of the CORS network/internet delivered corrections this kit provides x2 RS2 receivers so one can be configured as your own base station. Set up your base station over a known point and stream corrections to your rover via LoRa for cm accurate mapping.

In stock

SKU: 1500-30-01-2 Category:

Unit Specifications


Ingress protection:- IP67 (water and dustproof)

Size:- 145 x 145 x 85mm

Weight:- 950g

Temperature range:- -20 to +60oC


Battery life:- 15-22 hours

Charging point:- Micro USB

Certifications:- FCC, CE

External Power input:- 6-40V


Signals:- GPS/QZSS L1, SBAS, GLONASS G1, BeiDou B1, Galileo E1, SBAS

Update rate:- 10Hz GNSS

Tracking Channels:- 184



Interfaces:- USB, RS232, PPS Event

Radio:- LoRa 862/915 MHz

Wi-Fi:- 802.11a/b/g/n

Bluetooth:- 4.0/2.1 EDR


Static Horizontal:- 4mm + 0.5ppm

Static Vertical:- 8mm + 1ppm

Kinematic horizontal:- 7mm + 1ppm

Kinematic vertical:- 14mm +1ppm


NTRIP, VRS & RTCM3 corrections

NMEA and LLH/XYZ position output

RINEX logs with update rate up to 10Hz

16GB internal storage