Emlid RS+ – RTK Survey System

Emlid RS+ – RTK Survey System

$6,675.00 Incl. GST.

This kit includes all components required to establish a cost-effective, single-frequency RTK mapping setup, with a local base station and a rover unit.

Survey and Navigation with cm accuracy – Controlled by easy to use app on your Smartphone.

The reach view app is a basic mapping app collecting cm accurate data from WGS84 datum. Connect units to third party software like FieldGenius for local datums and more advanced mapping features.

KIT INCLUDES: Base unit, Rover unit, tripod, Tribrach with optical plummet, rotating tribrach adaptor, 2m pole, bipod & Extension pole (0.15m)

Our Partners: mapgear.com.au

Check out the intro video here

Base Station & Rover Kit application

If you are regularly working out of range of the CORS network/internet delivered corrections this kit provides x2 RS+ receivers so one can be configured as your own base station. Set up your base station over a known point and stream corrections to your rover via LoRa for cm accurate mapping.

SKU: 1500-30-01 Category:

Description

Unit Specifications

Mechanical

Ingress protection:- IP67 (water and dustproof)

Size:- 145 x 145 x 85mm

Weight:- 690g

Temperature range:- -20 to +60oC

Electrical

Battery life:- 30 hours

Charging point:- Micro USB

Certifications:- FCC, CE

External Power input:- 6-40V

GNSS

Signals:- GPS/QZSS L1, SBAS, GLONASS G1, BeiDou B1, Galileo E1, SBAS

Update rate:- 14Hz GPS / 5 Hz GNSS

Tracking Channels:- 72

IMU:- 9DOF

Connectivity

Interfaces:- USB, RS232, PPS Event

Radio:- LoRa862-1020MHz

Wi-Fi:- 802.11a/b/g/n

Bluetooth:- 4.0/2.1 EDR

Positioning

Static Horizontal:- 5mm + 1ppm

Static Vertical:- 10mm + 2ppm

Kinematic horizontal:- 7mm + 1ppm

Kinematic vertical:- 14mm +2ppm

Data

Internal Storage:- 8GB

Correction Input:- RTCM2, RTCM3

Solution Output:- NMEA, ERB plain text

Logs:- RINEX2.X, RINEX3.X